BRANCH CONNECTION REQUIREMENTS
A socket-weld branch outlet provides a branch connection from the wall of a larger pipe. The header interface and branch socket are separate parts of its geometry.
01 / PRODUCT OVERVIEW
The outlet body joins to the main pipe, often called the header or run, and provides a socket-weld connection for the branch pipe.
Unlike a tee placed between sections of the main run, a branch outlet is attached at a branch opening in the header. The header contour, branch size and required outlet design all matter to the connection.
General background for the explanation above. The project specification governs the actual selection.
02 / CONSTRUCTION
The outlet attaches at an opening in the main pipe. The header contour is part of the interface.
The socket receives the branch pipe. Its size is distinct from the main-pipe size.
03 / PRODUCT KNOWLEDGE
A branch outlet attaches to the wall of the main pipe. A tee is a fitting body inserted between sections of the run, with a third connection for the branch. The main-pipe interface distinguishes these arrangements.
Understand the tee arrangementThe branch pipe enters the outlet’s socket. The header-side attachment is a separate interface at the main-pipe opening.
The outlet’s attachment interface follows the main pipe’s contour. The branch size alone does not describe that interface.
04 / SELECTION CONSIDERATIONS
Provide the header size and pipe details needed to define the attachment interface.
Identify the branch size and socket-weld requirement.
Specify the required outlet design and applicable project requirements. Do not substitute an unspecified attachment configuration.
05 / UNDERSTAND THE SPECIFICATION
THERE IS MORE TO EXPLORE
Change a configuration. Compare a material. Understand a reference.
